1 3/4" Hand for 3 1/2" Dial Black Contemporary / Straight Clock Hands for Hansen Clocks with 1"+ Shaft These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the front of the movement. Optional second hand is available for purchase by clicking here.
$5.99
Add:
Gold 1 3/4" Hand for 3 1/2" Dial Black Contemporary / Straight Clock Hands for Hansen Clocks with 1"+ Shaft These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the front of the movement. Optional second hand is available for purchase by clicking here.
$5.99
Add:
This hand set includes an 3" Minute and an 2" Hour hand from mounting hole to tip. The length of the tail on the minute hand is 1" and on the hour hand is 1" measured from the mounting hole to the end. These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the front of the movement. Optional second hand is available for purchase by clicking here. Hands made in the USA.
$5.99
Add:
4 1/8" Hand for 8 1/4" Dial Black Contemporary / Straight Clock Hands for Hansen Clocks with 1"+ Shaft These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the front of the movement. Optional second hand is available for purchase by clicking here.
$5.99
Add:
4 1/8" Hand for 8 1/4" Dial Gold Contemporary / Straight Clock Hands for Hansen Clocks with 1"+ Shaft These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the front of the movement. Optional second hand is available for purchase by clicking here.
$5.99
Add:
This hand set includes an 4" Minute and an 3" Hour hand from mounting hole to tip. The length of the tail on the minute hand is 1" and on the hour hand is 1" measured from the mounting hole to the end. These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the front of the movement. Optional second hand is available for purchase by clicking here. Hands made in the USA.
$5.99
Add:
This hand set includes an 5" Minute and an 3 3/4" Hour hand from mounting hole to tip. The length of the tail on the minute hand is 1" and on the hour hand is 1" measured from the mounting hole to the end. These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the front of the movement. Optional second hand is available for purchase by clicking here. Hands made in the USA.
$5.99
Add:
6" Hand for 12" Dial Black Contemporary / Straight Clock Hands for Hansen Clocks with 1"+ Shaft These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the front of the movement. Optional second hand is available for purchase by clicking here.
$7.25
Add:
This hand set includes an 6 1/4" Minute and an 4 3/4" Hour hand from mounting hole to tip. The length of the tail on the minute hand is 1" and on the hour hand is 1" measured from the mounting hole to the end. These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the front of the movement. Optional second hand is available for purchase by clicking here. Hands made in the USA.
$5.99
Add:
This hand set includes an 6 1/4" Minute and an 4 1/4" Hour hand from mounting hole to tip. The length of the tail on the minute hand is 1 3/4" and on the hour hand is 1 1/8" measured from the mounting hole to the end. These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the front of the movement. Optional second hand is available for purchase by clicking here. Hands made in the USA.
$5.99
Add:
7" Spade (No Tail) Hansen Clock Hands for 1"+ shaft These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the front of the movement. Optional second hand is available for purchase by clicking here.
$6.99
Add:
8" Spade (No Tail) Hansen Clock hands for 1"+ shaft. These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the front of the movement. Optional second hand is available for purchase by clicking here.
$7.99
Add:
This hand set includes an 8" Minute and an 6" Hour hand from mounting hole to tip. This hand does not have a tail. These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the front of the movement. Optional second hand is available for purchase by clicking here. Hands made in the USA.
$6.99
Add:
This hand set includes an 11" Minute and an 8" Hour hand from mounting hole to tip. This measurement does not include the length of the tail. The tail on these hands are 5 1/8" on the minute hand and 4" on the hour hand from mounting hole to end. These hands are designed to work with Hansen Movements made after 1975. They may work with older Hansen Movements. The holes in the hands depend on the length of the shaft. This hand is made for movements with a shaft length of 1" or longer. Shaft length is measured from the very tip to the front of the movement. Optional second hand is available for purchase by clicking here. Hands made in the USA.
$12.99
Add:
14 1/4" Diamond (20 3/4" including Tail) Hansen Synchron Clock hands with counter weight on tail of minute hand. Minute hand is 14 1/4" from hole to tip, 20 3/4" including tail. Tail has a counter weight built in it. Hour hand is 11 to hole. Hands are metal. Black color. REQUIRES Synchron Clock movement with 1" or larger length shaft!!!! This set of hands is not setup for use with Quartz clock movements. For hands to use with Quartz clock movements please click here.
$13.95
Add:
17 1/2" Spade (22 1/2" including Tail) Hansen Synchron Clock hands with counter weight on tail of minute hand. Minute hand is 17 1/2" from hole to tip, 22 1/2" including tail. Tail has a counter weight built in it. Hour hand is 13 to hole, 18 total length. Hands are metal. Black color. REQUIRES Synchron Clock movement with 1" or larger length shaft!!!! This set of hands is not setup for use with Quartz clock movements. For hands to use with Quartz clock movements please click here.
$13.95
Add:
